对数正态型通用备件满足率评估及需求量计算方法

doi:10.12305/j.issn.1001-506X.2022.04.41

Abstract

Abstract:

Aiming at the problem of fill rate evaluation and demand calculation of lognormal component commonality, the life of lognormal components is approximated to gamma distribution by using the principle of average life and variance approximation, and the fill rate evaluation model of lognormal component commonality is established. Combined with the constraint of spare parts fill rate index, the demand calculation of lognormal component commonality is carried out. The simulation analysis combined with an example shows that when the logarithmic standard deviation of life is low, the lognormal component commonality fill rate evaluation model established in this paper has high evaluation accuracy and can evaluate the lognormal component commonality spare parts configuration project with different life distributions. The calculation method of spare parts demand can accurately give the lognormal component commonality configuration project under the constraint of spare parts fill rate index, so as to avoid over configuration. The proposed model and the calculation method of spare parts demand can provide theoretical support for the equipment support department to evaluate and determine the lognormal component commonality configuration project.

Key words: lognormal, component commonality, spare parts fill rate, evaluation

CLC Number:

E917
TJ07

Li XU, Minzhi RUAN, Hua LI. Method of fill rate evaluation and demand calculation for lognormal component commonality[J]. Systems Engineering and Electronics, 2022, 44(4): 1417-1423.

Figures/Tables 12

Fig.1

Fig.2

Table 1

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Table 2

Table 3

Table 4

References 33

1	MORGAN N R , DAVIS K D , RICHARDSON C , et al. Common components analysis: an adapted approach for evaluating programs[J]. Evaluation and Program Planning, 2018, 67, 1- 9. doi: 10.1016/j.evalprogplan.2017.10.009
2	PASCHE M , SKOLD M . Potential drawbacks of component commonality in product platform development[J]. International Journal of Automotive Technology and Management, 2012, 12 (1): 92- 108. doi: 10.1504/IJATM.2012.046006
3	TUNG D V , NAGEN N . Effects of component commonality in multi-component inventory models[J]. Opsearch, 2000, 37 (4): 294- 315. doi: 10.1007/BF03398620
4	李少龙, 黄南, 董红莉, 等. 航空发动机通用件设计体系建设思路研究[J]. 航空科学技术, 2019, 30 (4): 21- 25.
	LI S L , HUANG N , DONG H L , et al. Research on construction proposals of Aero-engine general parts design system[J]. Aeronautical Science & Technology, 2019, 30 (4): 21- 25.
5	SHUN T , SANKAR S . An approach to evaluate the profitability of component commonality[J]. Journal of Mechanical Design, 2017, 139 (7): 074501. doi: 10.1115/1.4036644
6	DEZA A , HUANG K , LIANG H F , et al. On component commonality for periodic review assemble-to-order systems[J]. Annals of Operations Research, 2018, 265 (1): 29- 46. doi: 10.1007/s10479-017-2507-2
7	张志华. 可靠性理论及工程应用[M]. 北京: 科学出版社, 2012: 15- 17.
	ZHANG Z H . Reliability theory and engineering application[M]. Beijing: Science Press, 2012: 15- 17.
8	SHERBROOKE C C . VARI-METRIC: improved approximations for multi-indenture, multi-echelon availability models[J]. Operations Research, 1986, 34 (2): 311- 319. doi: 10.1287/opre.34.2.311
9	SHERBROOKE C C. Optimal inventory modeling of systems: multi-echelon techniques[M]. London: Springer, 2004.
10	SIGRID L N . Finding and identifying optimal inventory levels for systems with common components[J]. European Journal of Operational Research, 2009, 193 (1): 98- 119. doi: 10.1016/j.ejor.2007.08.045
11	MA S H , WANG W , LIU L M . Commonality and postponement in multistage assembly systems[J]. European Journal of Operational Research, 2002, 142 (3): 523- 538. doi: 10.1016/S0377-2217(01)00314-9
12	LAURA T , JOERN M . Spare parts inventory management: new evidence from distribution fitting[J]. European Journal of Operational Research, 2019, 273 (1): 118- 130. doi: 10.1016/j.ejor.2017.09.039
13	TOPAN E , VAN D H . Operational level planning of a multi-item two-echelon spare parts inventory system with reactive and proactive interventions[J]. European Journal of Operational Research, 2020, 284 (1): 164- 175. doi: 10.1016/j.ejor.2019.12.022
14	DOUNIEL L I , BASTEN R , VAN H G . Spare parts inventory control under a fixed-term contract with a long-down constraint[J]. International Journal of Production Economics, 2020, 219, 123- 137. doi: 10.1016/j.ijpe.2019.05.023
15	ZHU S , JAARSVELD W V , DEKKER R . Spare parts inventory control based on maintenance planning[J]. Reliability Engineering and System Safety, 2020, 193, 106600. doi: 10.1016/j.ress.2019.106600
16	BOUTSELIS P , MCNAUGHT K . Using Bayesian networks to forecast spares demand from equipment failures in a changing service logistics context[J]. International Journal of Production Economics, 2019, 209 (3): 325- 333.
17	冯蕴雯, 刘奎剑, 薛小锋, 等. 基于Markov过程的冗余系统备件与冗余度联合优化[J]. 系统工程与电子技术, 2019, 41 (4): 921- 930.
	FENG Y W , LIU K J , XUE X F , et al. Joint optimization of redundancy level and spare parts for redundant system based on Markov proess[J]. Systems Engineering and Electronics, 2019, 41 (4): 921- 930.
18	RUPE J , WAY K . Performability of systems based on renewal process models[J]. IEEE Trans.on Systems Man Cybernetics-Systems: Part A, 1998, 28 (5): 691- 698. doi: 10.1109/3468.709618
19	NAHMAN J M , TANASKOVIC M R . Probability models for optimal sparing of distribution network transformers[J]. IEEE Trans.on Power Delivery, 2009, 24 (2): 758- 763. doi: 10.1109/TPWRD.2008.2007011
20	BABAI M Z , CHEN H , SYNTETOS A A , et al. A compound-Poisson Bayesian approach for spare parts inventory forecasting[J]. International Journal of Production Economics, 2021, 232, 107954. doi: 10.1016/j.ijpe.2020.107954
21	ZHAO J B , CAI Z Q , SI W T , et al. Mission success evaluation of repairable phased-mission systems with spare parts[J]. Computers & Industrial Engineering, 2019, 132 (6): 248- 259.
22	程海龙, 康锐, 韦艺, 等. 备件满足率与备件短缺量对比分析[J]. 北京航空航天大学学报, 2008, 34 (5): 580- 583.
	CHENG H L , KANG R , WEI Y , et al. Comparation analysis of fill rate and backorder[J]. Journal of Beijing University of Aeronautics and Astronautics, 2008, 34 (5): 580- 583.
23	张志华, 应新雅, 费广玉. 串联系统备件满足率分配及配置优化[J]. 系统工程理论与实践, 2015, 35 (11): 2987- 2992. doi: 10.12011/1000-6788(2015)11-2987
	ZHANG Z H , YING X Y , FEI G Y . Series system spares fill rate allocation and optimization[J]. Systems Engineering-Theory & Practice, 2015, 35 (11): 2987- 2992. doi: 10.12011/1000-6788(2015)11-2987
24	张建军, 李树芳, 张涛, 等. 备件保障度评估与备件需求量模型研究[J]. 可靠性与环境适应性理论研究, 2004, (6): 18- 22.
	ZHANG J J , LI S F , ZHANG T , et al. Study on spare availability and optimization model[J]. Electronic Product Reliability and Environmental Testing, 2004, (6): 18- 22.
25	WEN M L , LU B H , LI S Y , et al. Location and allocation problem for spare parts depot on integrated logistics support[J]. Journal of Systems Engineering and Electronics, 2019, 30 (6): 1252- 1259. doi: 10.21629/JSEE.2019.06.19
26	SAMUEL V C , SILVA G L C , LU D , et al. A demand classification scheme for spare part inventory model subject to stochastic demand and lead time[J]. Production Planning & Control, 2015, 26 (16): 1318- 1331.
27	RODRIGUES L R , YONEYAMA T . A spare parts inventory control model based on prognostics and health monitoring data under a fill rate constraint[J]. Computers & Industrial Engineering, 2020, 148, 106724.
28	HASNI M , AGUIR M S , BABAI M Z , et al. Spare parts demand forecasting: a review on bootstrapping methods[J]. International Journal of Production Research, 2019, 57 (15-16): 4791- 4804. doi: 10.1080/00207543.2018.1424375
29	HASNI M , BABAI M Z , AGUIR M S , et al. An investigation on bootstrapping forecasting methods for intermittent demands[J]. International Journal of Production Economics, 2018, 209 (3): 20- 29.
30	HASNI M , AGUIR M S , BABAI M Z , et al. On the perfor-mance of adjusted bootstrapping methods for intermittent demand forecasting[J]. International Journal of Production Economics, 2019, 216, 145- 153. doi: 10.1016/j.ijpe.2019.04.005
31	邵松世, 张志华, 李华, 等. 正态型有寿件的备件方案确定方法[J]. 航空学报, 2018, 39 (1): 193- 198.
	SHAO S S , ZHANG Z H , LI H , et al. Determination method for support plan for life-limited spares with normal distribution[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39 (1): 193- 198.
32	刘任洋, 李庆民, 王慎, 等. 任意寿命分布单元表决系统备件需求量的解析方法[J]. 系统工程与电子技术, 2016, 38 (3): 714- 718.
	LIU R Y , LI Q M , WANG S , et al. Analytical algorithm of spare demand fo voting system of any life distribution units[J]. Systems Engineering and Electronics, 2016, 38 (3): 714- 718.
33	茆诗松, 程依明, 濮晓龙. 概率论与数理统计教程[M]. 3版北京: 高等教育出版社, 2019: 168- 169.
	MAO S S , CHENG Y M , PU X L . Probability theory and mathematical statistics[M]. 3rd ed Beijing: Higher Education Press, 2019: 168- 169.

序号	对数均值	对数标准差	平均寿命/h	寿命标准差
1	6.6	0.2	749.9	151.5
2	6.6	0.4	796.3	331.7
3	6.6	0.6	880.1	579.3
4	5.4	0.4	239.8	99.9
5	5.4	1	365.0	478.5
6	6.6	1	1 212.0	1 588.7

对数均值	对数标准差
对数均值	0.3	0.4	0.5	0.6	0.7	0.8	0.9	1.0	1.1	1.2	1.3	1.4	1.5
5	0.78	1.22	2.01	1.12	1.93	3.43	5.34	6.87	11.09	18.77	27.68	38.02	50.22
5.5	0.47	0.37	0.38	1.36	2.23	2.58	3.37	6.90	10.79	17.58	25.30	36.32	47.57
6	0.20	0.18	0.90	1.04	1.27	2.17	4.09	6.98	10.81	15.73	22.68	33.13	43.74
6.5	0.20	0.96	0.73	0.75	1.35	2.81	4.84	7.48	11.11	15.93	21.90	29.59	39.05
7	0.11	1.00	0.71	2.02	3.07	3.99	5.39	8.18	8.90	12.77	17.82	24.43	33.16

参数	序号
参数	1	2	3	4	5	6	7	8	9	10
备件数量	0	1	2	3	4	5	6	7	8	9
解析方法	0	0	0	0	0	0	0	0	0	0
仿真方法	0	0	0	0	0	0	0	0	0	0
误差/%	-	-	-	-	-	-	-	-	-	-

参数	序号
参数	11	12	13	14	15	16	17	18	19	20
备件数量	10	11	12	13	14	15	16	17	18	19
解析方法	0	0	0	0	0	0	0.000 2	0.001	0.003 4	0.010
仿真方法	0	0	0	0	0	0	0.002	0.002	0.005 3	0.013
误差/%	-	-	-	-	-	-	85.76	57.89	35.49	18.75

参数	序号
参数	21	22	23	24	25	26	27	28	29	30
备件数量	20	21	22	23	24	25	26	27	28	29
解析方法	0.027	0.060	0.118	0.206	0.323	0.460	0.600	0.726	0.828	0.901
仿真方法	0.027	0.058	0.112	0.204	0.324	0.450	0.584	0.732	0.832	0.898
误差/%	0.44	3.39	4.73	0.97	0.225	2.32	2.67	0.73	0.41	0.373

装备序号	年工作时间/h	备件数量	备件满足率
1	400	5	0.960
2	600	7	0.940
3	800	9	0.910
4	1 000	11	0.896
合计	—	32	—

[1]	Zhigeng FANG, Yuexin XIA, Jingru ZHANG, Yi XIONG, Jingyi CHEN. A stimulus-response learning model for Agent-based system process A-GERT network [J]. Systems Engineering and Electronics, 2022, 44(8): 2540-2553.
[2]	Xiaofeng ZHAO, Fei WU, Yebin XU, Jiahui NIU, Wei CAI, Zhili ZHANG. Evaluation method of infrared camouflage effect based on background restoration [J]. Systems Engineering and Electronics, 2022, 44(8): 2554-2561.
[3]	Wenqi WANG, Dengying JIANG. Linguistic intuitionistic fuzzy PROMETHEE multi-attribute group decision-making based on the probability degree [J]. Systems Engineering and Electronics, 2022, 44(8): 2581-2592.
[4]	Shunqi HUAN, Zhemei FAN, Jianbo WANG. System-of-systems effectiveness evaluation method based on functional dependency network [J]. Systems Engineering and Electronics, 2022, 44(7): 2191-2200.
[5]	Jiang JIANG, Qiancheng JIN, Xueming XU, Shuai HOU, Jichao LI. Preliminary study on national defense science and technology system engineering in the era of intelligence [J]. Systems Engineering and Electronics, 2022, 44(6): 1880-1888.
[6]	Changxiao ZHAO, Ershuai LI, Feng HE, Peng WANG. Bandwidth allocation and optimization of time-sensitive traffic in TSN [J]. Systems Engineering and Electronics, 2022, 44(6): 2027-2034.
[7]	Yuanjie LU, Zhimin LIU, Zhixiao SUN, Dong KAN. Model-based integrated evaluation of UAV system architecture [J]. Systems Engineering and Electronics, 2022, 44(4): 1239-1245.
[8]	Gang DING, Lin ZHANG, Lijie CUI, Liang ZHANG, Xinchun LI. Research on simulation evaluation method of aviation equipment unit maintenance and support [J]. Systems Engineering and Electronics, 2022, 44(4): 1246-1255.
[9]	Xiangyang LIN, Qinghua XING, Fuxian LIU. Research on optimization of combat force for key air defense model [J]. Systems Engineering and Electronics, 2022, 44(3): 921-928.
[10]	Luyun QIU, Zhigeng FANG, Liangyan TAO, Qiucheng TAO. Effectiveness evaluation of network SoS based on improved FDNA model [J]. Systems Engineering and Electronics, 2022, 44(12): 3728-3737.
[11]	Yongpan WANG, Jianxin SU, Ming GONG, Hua LIU. Combat-oriented effect evaluation model of full function operation training of radar [J]. Systems Engineering and Electronics, 2022, 44(12): 3766-3774.
[12]	Han ZHANG, Yanyan HUANG, Ze GENG, Zhen ZHANG. Evaluation method of emergency response support scheme in military camp simulation and wargaming [J]. Systems Engineering and Electronics, 2022, 44(11): 3433-3442.
[13]	Chenrui SHI, Lu TIAN, Zhan XU, Ruxin ZHI, Jinhui CHEN. Effectiveness evaluation method of emergency communication and sensing equipment based on PSO-BP [J]. Systems Engineering and Electronics, 2022, 44(11): 3455-3462.
[14]	Wei ZHANG, Jing HE, Xiaowei XIE, Guoqiang ZHAO, Zhen CHEN. Design and implementation of simulation evaluation system for joint battlefield navigation countermeasure [J]. Systems Engineering and Electronics, 2022, 44(10): 3182-3189.
[15]	Mei LI, Guanghui WEI, Hongze ZHAO, Jianyong ZHENG, Xue DU. Analysis of blocking effects of electromagnetic radiation noise on navigation receiver [J]. Systems Engineering and Electronics, 2022, 44(10): 3221-3227.

Method of fill rate evaluation and demand calculation for lognormal component commonality

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 12

References 33

Related Articles 15

Recommended Articles

Metrics

Comments