Unified control and detection framework and its applications: a review, some new results, and future perspectives

doi:10.23919/JSEE.2021.000085

Journal of Systems Engineering and Electronics ›› 2021, Vol. 32 ›› Issue (5): 995-1013.doi: 10.23919/JSEE.2021.000085

• • 下一篇

收稿日期:2021-02-01 出版日期:2021-10-18 发布日期:2021-11-04

Unified control and detection framework and its applications: a review, some new results, and future perspectives

Steven Xianchuan DING¹(), Linlin LI^2,*(), Bin JIANG³()

¹ Institute for Automatic Control and Complex Systems, University of Duisburg-Essen, Duisburg 47057, Germany
² School of Automation and Electrical Engineering, University of Science and Technology Beijing, Beijing 100083, China
³ College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2021-02-01 Online:2021-10-18 Published:2021-11-04
Contact: Linlin LI E-mail:steven.ding@uni-due.de;linlin.li@ustb.edu.cn;binjiang@nuaa.edu.cn
About author:|DING Steven Xianchuan was born in 1959. He received his Ph.D. degree in electrical engineering from the Gerhard-Mercator University of Duisburg, Germany, in 1992. From 1992 to 1994, he was a research and development engineer with Rheinmetall. From 1995 to 2001, he was a professor of control engineering with the University of Applied Science Lausitz, Senftenberg, Germany, where he served as a vice president from 1998 to 2000. Since 2001, he has been the chair professor of control engineering and head of the Institute for Automatic Control and Complex Systems with the University of Duisburg-Essen, Germany. His research interests are model-based and data-driven fault diagnosis, control and fault-tolerant systems, and their application in industry with a focus on automotive systems, chemical processes, and renewable energy systems. E-mail: steven.ding@uni-due.de||LI Linlin was born in 1987. She received her B.E. degree from Xi’an Jiaotong University, China, in 2008, M.E. degree from Peking University, China, in 2011, and Ph.D. degree from the Institute for Automatic Control and Complex Systems (AKS), University of Duisburg-Essen, Germany. She is currently an associate professor with the School of Automation and Electrical Engi-neering, University of Science and Technology Beijing, China. Her research interests include fault diagnosis and fault tolerant control, fuzzy control, and estimation for nonlinear systems. E-mail: linlin.li@ustb.edu.cn||JIANG Bin was born in 1966. He received his Ph.D. degree in automatic control from Northeastern University, Shenyang, China, in 1995. He has been a postdoctoral fellow or a research fellow in Singapore, France, and the USA, and a visiting professor in Canada. He is currently a chair professor of Cheung Kong Scholar Program in Ministry of Education, and vice president in Nanjing University of Aeronautics and Astronautics, Nanjing, China. His current research interests include fault diagnosis and fault-tolerant control and their applications. E-mail: binjiang@nuaa.edu.cn
Supported by:
This work was supported by the National Natural Science Foundation of China (62020106003, 62073029), the Beijing Natural Science Foundation (4202045), and the Fundamental Research Funds for the Central Universities (FRF-TP-20-012A3).

摘要/Abstract

Abstract:

Initiated three decades ago, integrated design of controllers and fault detectors has continuously attracted research attention. The recent development of the unified control and detection framework with an observer-based residual generator in its core gives a more general form of the previous works. Its applications to residual centred modelling of uncertain control systems, fault detection in feedback control systems with uncertainties, fault-tolerant control (FTC) as well as control performance degradation monitoring, detection and recovery are introduced. In conclusion, some future perspectives are proposed.

Key words: unified framework of control and detection, observer-based residual generator, Youla parameterisation, detection of additive and multiplicative faults in control loop, fault-tolerant control (FTC), loop performance degradation (LPD) monitoring and recovery

. [J]. Journal of Systems Engineering and Electronics, 2021, 32(5): 995-1013.

Steven Xianchuan DING, Linlin LI, Bin JIANG. Unified control and detection framework and its applications: a review, some new results, and future perspectives[J]. Journal of Systems Engineering and Electronics, 2021, 32(5): 995-1013.

图/表 7

参考文献 42

1	DING S X. Model-based fault diagnosis techniques—design schemes, algorithms and tools. 2nd ed. London: Springer-Verlag, 2013.
2	DU D S, JIANG B, SHI P, et al Fault detection for continuous-time switched systems under asynchronous switching. International Journal of Robust and Nonlinear Control, 2014, 24 (11): 1694- 1704. doi: 10.1002/rnc.2961
3	SHEN Q S, JIANG B, SHI P Fault diagnosis for T-S fuzzy systems with sensor faults and system performance analysis. IEEE Trans. on Fuzzy Systems, 2014, 22 (2): 274- 284. doi: 10.1109/TFUZZ.2013.2252355
4	NETT C N, JACOBSON C, MILLER A T An integrated approach to controls and diagnostics. Proc. of the American Control Conference, 1988, 824- 835.
5	JACOBSON C, NETT C An integrated approach to controls and disgnostics using the four parameter controller. IEEE Control Systems Magazine, 1991, 11 (6): 22- 29. doi: 10.1109/37.92987
6	TYLER M L, MORARI M Optimal and robust design of integrated control and diagnostic modules. Proc. of American Control Conference, 1994, 2060- 2064.
7	MURAD G, POSTLETHWAITE I, GU D W A robust design approach to integrated control and diagnostics. Proc. of the 13th International Federation of Automatic Control Word Congress, 1996, 7, 199- 204.
8	KISGAARD S, RANK M, NIEMANN H, et al Simultaneous design of controller and fault detector. Proc. of the 35th IEEE Conference on Decision and Control, 1996, 628- 629.
9	SOUTSTRUP J, GRIMBLE M, NIEMANN H Design of integrated systems for the control and detection of actuator/sensor faults. Sensor Review, 1997, 17 (2): 138- 149. doi: 10.1108/02602289710170311
10	NIEMANN H, SOUTSTRUP J Integration of control and fault detection: nominal and robust design. Proc. of the 3rd International Federation of Automatic Control Symposium, 1997, 30 (18): 341- 346.
11	ZHOU K M, DOYLE J, GLOVER K. Robust and optimal control. New Jersey: Prentice-Hall, 1996.
12	KHOSROWJERDI M J, NIKOUKHAH R, SAFARI-SHAD N A mixed H-2/H-infinity approach to simultaneous fault detection and control. Automatica, 2004, 40 (2): 261- 267. doi: 10.1016/j.automatica.2003.09.011
13	WENG Z X, PATTON R, CUI P Integrated design of robust controller and fault estimator for linear parameter varying systems. Proc. of the 17th International Federation of Automatic Control World Congress, 2008, 41 (2): 4535- 4539.
14	WANG H, YANG G H Integrated fault detection and control for LPV systems. International Journal of Robust and Nonlinear Control, 2009, 19 (3): 341- 363. doi: 10.1002/rnc.1330
15	DING S X Integrated design of feedback controllers and fault detectors. Annual Reviews in Control, 2009, 33 (2): 124- 135. doi: 10.1016/j.arcontrol.2009.08.003
16	HENRY D, ZOLGHADRI A Design and analysis of robust residual generators for systems under feedback control. Automatica, 2005, 41 (2): 251- 264. doi: 10.1016/j.automatica.2004.09.013
17	SUZUKI T, TOMIZUKA M Joint synthesis of fault detector and controller based on structure of two-degree-of-freedom control system. Proc. of the 38th IEEE Conference on Decision and Control, 1999, 3599- 3604.
18	ZHOU K M, REN Z A new controller architecture for high performance, robust, and fault-tolerant control. IEEE Trans. on Automatic Control, 2001, 46 (10): 1613- 1618. doi: 10.1109/9.956059
19	DING S X, YANG G J, ZHANG P, et al Feedback control structures, embedded residual signals and feedback control schemes with an integrated residual access. IEEE Trans. on Control Systems Technology, 2010, 18 (2): 352- 367. doi: 10.1109/TCST.2009.2018451
20	DING S X. Data-driven design of fault diagnosis and fault-tolerant control systems. London: Springer-Verlag, 2014.
21	STEVEN X D. Advanced methods for fault diagnosis and fault-tolerant control. Berlin: Springer-Verlag, 2020.
22	WILLEMS J Deterministic least squares filtering. Journal of Econometrics, 2014, 118 (1/2): 341- 373.
23	GEORGIOU T T, SMITH M C Optimal robustness in the gap metric. IEEE Trans. on on Automatic Control, 1990, 35 (6): 673- 686. doi: 10.1109/9.53546
24	LI L L, LUO H, DING S X Performance-based fault detection and fault-tolerant control for automatic control systems. Automatica, 2019, 99, 308- 316. doi: 10.1016/j.automatica.2018.10.047
25	DING S X, LI L L Gap metric techniques and their application to fault detection performance analysis and fault isolation schemes. Automatica, 2020, 118, 109029. doi: 10.1016/j.automatica.2020.109029
26	LI L L, DING S X Optimal detection schemes for multiplicative faults in uncertain systems with application to rolling mill processes. IEEE Trans. on Control Systems Technology, 2020, 28 (6): 2432- 2444. doi: 10.1109/TCST.2019.2947876
27	VIDYASAGAR M, KIMURA H Robust controllers for uncertain linear variable systems. Automatica, 1986, 22, 85- 94. doi: 10.1016/0005-1098(86)90107-X
28	VINNICOMBE G. Uncertainty and feedback: H loop-shaping and the V-gap metric. Singapore: World Scientific, 2000.
29	SKOGESTAD S, POSTLETHWAITE I. Multivariable feedback control. New York: John Wiley and Sons, Ltd, 2005.
30	FRANCIS B A. A course in H-infinity control theory. Berlin/New York: Springer-Verlag, 1987.
31	TAY T T, MAREELS I, MOORE J B. High performance control. New York: Springer Science & Business Media, 1998.
32	LI L L, DING S X, LUO H, et al Performance-based fault-tolerant control approaches for industrial processes with multiplicative faults. IEEE Trans. on Industrial Information, 2020, 16 (7): 4759- 4768. doi: 10.1109/TII.2019.2946882
33	LI L L, DING S X Performance supervised fault detection schemes for industrial feedback control systems and their data-driven implementation. IEEE Trans. on Industrial Information, 2020, 16 (4): 2849- 2858. doi: 10.1109/TII.2019.2940099
34	LUO H, YIN S, LIU T Y, et al A data-driven realization of the control performance-oriented process monitoring system. IEEE Trans. on Industrial Electronics, 2020, 67 (1): 521- 530. doi: 10.1109/TIE.2019.2892705
35	XU Y S, DING S X, LUO H, et al A real-time performance recovery framework for vision-based control systems. IEEE Trans. on Industrial Electronics, 2021, 68 (2): 1571- 1580. doi: 10.1109/TIE.2020.2967678
36	LIU D, YANG Y, LI L L, et al Control performance-based fault-tolerant control strategy for singular systems. IEEE Trans. on Systems, Man, and Cybernetics: Systems, 2020, 50 (7): 2398- 2407. doi: 10.1109/TSMC.2018.2815002
37	HAN H Y, YANG Y, LI L L, et al Performance-based fault detection and fault-tolerant control for nonlinear systems with T-S fuzzy implementation. IEEE Trans. on Cybernetics, 2021, 51 (2): 801- 804. doi: 10.1109/TCYB.2019.2951534
38	ZHONG M Y, DING S X, ZHOU D H, et al An H_i/H_∞ optimization approach to event triggered fault detection for linear discrete time systems . IEEE Trans. on Automatic Control, 2020, 65 (10): 4464- 4471. doi: 10.1109/TAC.2020.3006811
39	DING S X, YANG Y, ZHANG Y, et al Data-driven realization of kernel and image representations and their application to fault detection and control system design. Automatica, 2014, 50 (10): 2615- 2623. doi: 10.1016/j.automatica.2014.08.022
40	YANG X, GAO J J, LUO H, et al Data-driven design of fault tolerant control systems based on recursive stable image representation. Automatica, 2020, 122, 109246. doi: 10.1016/j.automatica.2020.109246
41	LI L L, DING S X, YANG Y, et al A fault detection approach for nonlinear systems based on data-driven realizations of fuzzy kernel representations. IEEE Trans. on Fuzzy Systems, 2018, 26 (4): 1800- 1812. doi: 10.1109/TFUZZ.2017.2752136
42	GRIEVES M. Virtually intelligent product systems: digital and physical twins. Virginia: American Institute of Aeronautics and Astronautics, 2019.

Unified control and detection framework and its applications: a review, some new results, and future perspectives

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 7

参考文献 42

相关文章 0

编辑推荐

Metrics

本文评价