System reliability evaluation method considering physical dependency with FMT and BDD analytical algorithm

doi:10.23919/JSEE.2022.000022

Journal of Systems Engineering and Electronics ›› 2022, Vol. 33 ›› Issue (1): 222-232.doi: 10.23919/JSEE.2022.000022

收稿日期:2020-10-12 接受日期:2021-11-25 出版日期:2022-01-18 发布日期:2022-02-22

System reliability evaluation method considering physical dependency with FMT and BDD analytical algorithm

Ying CHEN^1,²(), Yanfang WANG^1,^2,*(), Song YANG^1,^2,³(), Rui KANG^1,²()

¹ School of Reliability and System Engineering, Beihang University, Beijing 100191, China
² Science and Technology on Reliability and Environmental Engineering Laboratory, Beihang University, Beijing 100191, China
³ China Academy of Launch Vehicle Technology, Bejing 100076, China

Received:2020-10-12 Accepted:2021-11-25 Online:2022-01-18 Published:2022-02-22
Contact: Yanfang WANG E-mail:cheny@buaa.edu.cn;Wang_YF@buaa.edu.cn;sy18142@buaa.edu.cn;kangrui@buaa.edu.cn
About author:|CHEN Ying was born in 1977. She received her Ph.D. degree in instrument science and technology from Tsinghua University, Beijing, China, in 2006. She is currently an associate professor with the School of Reliablity and Systems Engineering, Beihang University. She was a visiting scholar of University of California from 2016 to 2017. Her research interests include failure behavior and reliablity modeling method and risk science. E-mail: cheny@buaa.edu.cn||WANG Yanfang was born in 1998. She received her B.S. degree from Hebei University of Technology in 2020. She is now pursing her M.S. degree in the School of Reliablity and Systems Engineering, Beihang University, Beijing, China. Her primary research interests include the reliability of electronic products and the system failure behavior. E-mail: Wang_YF@buaa.edu.cn||YANG Song was born in 1995. He received his B.S. degree from Nanjing University of Aeronautics and Astronautics of China, Nanjing, China, in 2018. He received his M.S. degree in 2021, from the School of Reliability and Systems Engineering, Beihang University and is now working at China Academy of Launch Vehicle Technology. His primary research interests include failure behavior modeling and reliability simulation, specialized in the systems engineering, the reliability of electronic products, and the system failure behavior. E-mail: sy18142@buaa.edu.cn||KANG Rui was born in 1966. He is a distinguished professor in the School of Reliability and Systems Engineering, Beihang University, Beijing, China. He received his B.S. and M.S. degrees in electrical engineering from Beihang University in 1987 and 1990, respectively. He has developed six courses, and published eight books and more than 200 research papers. He is currently serving as the associate editor of IEEE Trans. on Reliability and is the founder of China Prognostics and Health Management Society. He received several awards from the Chinese government for his outstanding scientific contributions, including Changjiang Chair Professor awarded by the Chinese Ministry of Education. His main research interests include reliability, resilience for complex system, and modeling epistemic uncertainty in reliability and maintainability. E-mail: kangrui@buaa.edu.cn
Supported by:
This work was supported by the National Natural Science Foundation of China (61503014; 62073009)

摘要/Abstract

Abstract:

Recently, the physics-of-failure (PoF) method has been more and more popular in engineering to understand the failure mechanisms (FMs) of products. However, due to the lack of system modeling methods and problem-solving algorithms, the information of FMs cannot be used to evaluate system reliability. This paper presents a system reliability evaluation method with failure mechanism tree (FMT) considering physical dependency (PDEP) such as competition, trigger, acceleration, inhibition, damage accumulation, and parameter combination. And the binary decision diagram (BDD) analytical algorithm is developed to establish a system reliability model. The operation rules of ite operators for generating BDD are discussed. The flow chart of system reliability evaluation method based on FMT and BDD is proposed. The proposed method is applied in the case of an electronic controller drive unit. Results show that the method is effective to evaluate system reliability from the perspective of FM.

Key words: system reliability modeling, failure physical dependency, failure mechanism tree (FMT), binary decision diagram (BDD)

. [J]. Journal of Systems Engineering and Electronics, 2022, 33(1): 222-232.

Ying CHEN, Yanfang WANG, Song YANG, Rui KANG. System reliability evaluation method considering physical dependency with FMT and BDD analytical algorithm[J]. Journal of Systems Engineering and Electronics, 2022, 33(1): 222-232.

图/表 17

参考文献 30

1	WATSON H. Launch control safety study. Murray, USA: Bell Telephone Laboratories, 1961.
2	RAO K D, GOPIKA V, RAO V S, et al Dynamic fault tree analysis using Monte Carlo simulation in probabilistic safety assessment. Reliability Engineering and System Safety, 2009, 94 (4): 872- 883.
3	DUGAN J B, DOYLE S A New results in fault-tree analysis. Proc. of the Reliability and Maintainability Symposium, 1996, 568- 573.
4	ZHU P C, HAN J, LIU L B, et al A stochastic approach for the analysis of fault trees with priority AND gates. IEEE Trans. on Reliability, 2014, 63 (2): 480- 494. doi: 10.1109/TR.2014.2313796
5	CHIACCHIO F, COMPAGNO L, DURSO D, et al. An open-source application to model and solve dynamic fault tree of real industrial systems. Proc. of the 5th International Conference on Software, Knowledge Information, Industrial Management and Applications, 2011. DOI: 10.1109/SKIMA.2011.6174521.
6	MISRA K B. Handbook of performability engineering. New York: Springer, 2008.
7	WANG Z, LIU X S, LI M A Ad hoc distributed mutual exclusion algorithm based on token-asking. Journal of Systems Engineering and Electronics, 2007, 18 (2): 398- 406. doi: 10.1016/S1004-4132(07)60104-2
8	SUN B L, LI L Y Reliable adaptive multicast protocol in wireless ad hoc networks. Journal of Systems Engineering and Electronics, 2006, 17 (1): 187- 192. doi: 10.1016/S1004-4132(06)60033-9
9	KE J C, SU Z L, WANG K H, et al Simulation inferences for an availability system with general repair distribution and imperfect fault coverage. Simulation Modelling Practice and Theory, 2010, 18 (3): 338- 347. doi: 10.1016/j.simpat.2009.12.001
10	ZHANG P, CHAN K W Reliability evaluation of phasor measurement unit using Monte Carlo dynamic fault tree method. IEEE Trans. on Smart Grid, 2012, 3 (3): 1235- 1243. doi: 10.1109/TSG.2011.2180937
11	CAI Q W, WEI P, XIAO X C Single channel signal component separation using Bayesian estimation. Journal of Systems Engineering and Electronics, 2007, 18 (1): 33- 39. doi: 10.1016/S1004-4132(07)60046-2
12	LINDHE A, NORBEG T, ROSEN L Approximate dynamic fault tree calculations for modelling water supply risks. Reliability Engineering and System Safety, 2012, 106, 61- 71.
13	XING L D, SHRESTHA A, DAI Y W Exact combinatorial reliability analysis of dynamic systems with sequence-dependent failure. Reliability Engineering and System Safety, 2011, 96 (10): 1375- 1385. doi: 10.1016/j.ress.2011.05.007
14	XING L D, TANNOUS O, DUGAN J B Reliability analysis of nonrepairable cold-standby systems using sequential binary decision diagrams. IEEE Trans. on Systems, Man, and Cybernetics—Part A: Systerms and Humans, 2012, 42 (3): 715- 726.
15	ZHANG T, GUO B, TAN Y J, et al. New BDD-based algorithm for reliability analysis of phased-mission systems. Journal of System Engineering and Electronics, 2005, 16 (1): 1−6.
16	XING L D, LEVITIIN G BDD-based reliability evaluation of phased-mission systems with internal/external common-cause failures. Reliability Engineering and System Safety, 2013, 112, 145- 153.
17	XING L D Reliability evaluation of phased-mission systems with imperfect fault coverage and common-cause failures. IEEE Trans. on Reliability, 2007, 56 (1): 58- 68. doi: 10.1109/TR.2006.890900
18	MO Y C, XING L D, DUGAN J B MDD-based method for efficient analysis on phased-mission systems with multimode failures. IEEE Trans. on Systems, Man & Cybernetics Systems, 2014, 44 (6): 757- 769.
19	FANG J Y, KANG R, CHEN Y Reliability evaluation of non-repairable systems with failure mechanism trigger effect. Reliability Engineering and System Safety, 2021, 210, 107454.
20	CHEN Y, WANG Z, LI Y Y, et al Reliability analysis of a cold-standby system considering the development stages and accumulations of failure mechanisms. Reliability Engineering and System Safety, 2018, 180, 1- 12.
21	CHEN Y, YU X Y, LI Y Y A failure mechanism cumulative model for reliability evaluation of a k-out-of-n system with load sharing effect. IEEE Access, 2018, 7, 2210- 2222.
22	CHEN Y, YANG S, KANG R. Reliability evaluation of avionics system with imperfect fault coverage and propagated failure mechanisms. Chinese Journal of Aeronautics, 2020, 33(12): 3437−3446.
23	LI Y Y, CHEN Y, et al Reliability analysis of multi-state systems subject to failure mechanism dependence based on a combination method. Reliability Engineering and System Safety, 2016, 166, 109- 123.
24	CHEN Y, LI Y Y, KANG R Reliability analysis of MS-PM system based on failure mechanism accumulation method. IEEE Access, 2018, 6, 45707- 45714. doi: 10.1109/ACCESS.2018.2865239
25	CHEN Y, YANG L, YE C, et al Failure mechanism dependence and reliability evaluation of non-repairable system. Reliability Engineering and System Safety, 2015, 138, 273- 283. doi: 10.1016/j.ress.2015.02.002
26	BRYANT R E Graph-based algorithms for Boolean function manipulation. IEEE Trans. on Computers, 1986, 35 (8): 677- 691.
27	RAUZY A New algorithms for fault trees analysis. Reliability Engineering and System Safety, 1993, 40 (3): 203- 211.
28	GE D C, LIN M, YANG Y H, et al Quantitative analysis of dynamic fault trees using improved sequential binary decision diagrams. Reliability Engineering and System Safety, 2015, 142, 289- 299. doi: 10.1016/j.ress.2015.06.001
29	JUNG W S, HAN S H, HA J A fast BDD algorithm for large coherent fault trees analysis. Reliability Engineering and System Safety, 2004, 83, 369- 374.
30	MILLER D M, DRECHSLER R. On the construction of multiple-valued decision diagrams. Proc. of the 32nd IEEE International Symposium on Multiple-Valued Logic, 2002. DOI:10.1109/ISMVL.2002.1011095.

Component		Mechanism	Failure effect	Correlation	Distribution type	Characteristic parameter
Component		Mechanism	Failure effect	Correlation	Distribution type	$\beta (\theta ) $	$\eta (\sigma ) $
VR	VR_f1	TDDB	Parameter drift	MADA	Weibull	2.90	3954
VR	VR_f2	NTBI	Parameter drift	MADA	Weibull	4.80	12245
DR	DR_f2	TF	High resistance	MACC	Weibull	4.76	9757
DR	DR_f1	VF	Open circuit	MACC	Weibull	2.00	6979
IC	IC_f1	TF	Open circuit	MACO	Lognormal	8.71	0.27
IC	IC_f2	VF	—	MACO	Weibull	2.76	8257
LC	LC_f1	TF	—	MACT	Weibull	7.20	9181
LC	LC_f2	EM	—	MACT	Weibull	4.17	8009

System reliability evaluation method considering physical dependency with FMT and BDD analytical algorithm

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 17

参考文献 30

相关文章 0

编辑推荐

Metrics

本文评价